Cotton is pure natural fiber, soft and comfortable, good moisture permeability, and not stimulate the skin, not afford to static, not only people love clothing material, but also it is best choice for baby clothing, bathroom and bedding.
Especially in the winter, popular with the public. However, due to high quality cotton than a variety of man-made chemical fiber costs higher, some bad business will be in the lower grade blended or even full chemical fiber fabric marked "100% cotton" label. Do not think that ordinary consumers of "counterfeit cotton" can not be applied, as long as the simple three strokes, "false cotton" immediately no escape.
The first move: "Tathagata palm"
Cotton fabric feel soft and soft, feeling full and thick, with a sense of astringent and bones sense, can pull the smaller, pull the recovery rate is slower; and chemical fiber fabric feel soft, slippery, stretch , A let go will be back to the prototype.
In addition, because the cotton yarn is more tough and elastic weak, so cotton clothes come up after the recovery time will be slightly longer, to determine the cotton, you can fold the fabric, and then scraping along the edge of the nail, after the start, scratches the more Obviously, the higher the cotton content, the pure fiber fabric will not be scratched.
The second measure: "eyes"
In addition to caustic soda-treated mercerized cotton, the cotton fabric is not obvious luster, natural color soft, the clothes naturally put down, drape naturally, very few "reflective" phenomenon, the purchase can be flattened and added a certain tension, And then the fabric and the body down 45 angle against the light source, if there is light flash, then this must be a high content of chemical fiber clothing. In addition, due to the addition of fluorescent whitening agent, chemical fiber white clothing than white cotton clothing, and even there will be dazzling feeling.
The third hurdle: "Sanmei real fire"
From a professional point of view, the best way is to use the "Sanmei real fire" refining a refining: from the clothing edge of the edge of the small root yarn to its inspection, the real natural cotton fiber burning will not melt, But the same as the paper will produce a natural yellow flame, while the smell of burning paper, burned to produce can be broken off the gray ashes; and chemical fiber in the burning will melt and drip, as well as black smoke and burning , Burning will form a black hard spot.
Of course, this test method for the average consumer is not safe and not realistic, so, just make good use of your "Tathagata palm" and "golden eyes", usually pay more attention to the cotton and textile information And knowledge, you can polish bright eyes, choose the real "100% cotton" clothing.
Especially in the winter, popular with the public. However, due to high quality cotton than a variety of man-made chemical fiber costs higher, some bad business will be in the lower grade blended or even full chemical fiber fabric marked "100% cotton" label. Do not think that ordinary consumers of "counterfeit cotton" can not be applied, as long as the simple three strokes, "false cotton" immediately no escape.
The first move: "Tathagata palm"
Cotton fabric feel soft and soft, feeling full and thick, with a sense of astringent and bones sense, can pull the smaller, pull the recovery rate is slower; and chemical fiber fabric feel soft, slippery, stretch , A let go will be back to the prototype.
In addition, because the cotton yarn is more tough and elastic weak, so cotton clothes come up after the recovery time will be slightly longer, to determine the cotton, you can fold the fabric, and then scraping along the edge of the nail, after the start, scratches the more Obviously, the higher the cotton content, the pure fiber fabric will not be scratched.
The second measure: "eyes"
In addition to caustic soda-treated mercerized cotton, the cotton fabric is not obvious luster, natural color soft, the clothes naturally put down, drape naturally, very few "reflective" phenomenon, the purchase can be flattened and added a certain tension, And then the fabric and the body down 45 angle against the light source, if there is light flash, then this must be a high content of chemical fiber clothing. In addition, due to the addition of fluorescent whitening agent, chemical fiber white clothing than white cotton clothing, and even there will be dazzling feeling.
The third hurdle: "Sanmei real fire"
From a professional point of view, the best way is to use the "Sanmei real fire" refining a refining: from the clothing edge of the edge of the small root yarn to its inspection, the real natural cotton fiber burning will not melt, But the same as the paper will produce a natural yellow flame, while the smell of burning paper, burned to produce can be broken off the gray ashes; and chemical fiber in the burning will melt and drip, as well as black smoke and burning , Burning will form a black hard spot.
Of course, this test method for the average consumer is not safe and not realistic, so, just make good use of your "Tathagata palm" and "golden eyes", usually pay more attention to the cotton and textile information And knowledge, you can polish bright eyes, choose the real "100% cotton" clothing.
The quality of the fabric is related to the beauty and comfort of the garment, but if the quality of the fabric is very good, but the wrong side, it still can not achieve the desired effect. So the distinction between the front and back of the fabric is also a garment processing or other fabric applications when a simple and important work.
1, most of the fabric in the front of the pattern and color will be better than the negative side of the good-looking; if there are lines or other patterns on the above, then it is certainly more positive; if the fabric above the protruding part , That in the positive place will certainly be more closely, will be more meticulous, but in the opposite, then it will be more rough, there will be floating long line there; you can also check the fabric of the cloth side, if more clean and tidy is positive.
2, in addition to all kinds of fabrics have their own characteristics, such as fluff fabric, if it is single-sided fluff, that is plush side is positive, but if it is double-sided hair, that positive is certainly Is the villi relatively smooth steam that side; multi-layer fabric if the pros and cons of both latitude and longitude density, most of the case the raw material is better, or the density is relatively large side is positive; another leno fabric front Ask the way to protrude some of the front of the towel fabric terry will be relatively large density, printed fabric, the color is relatively bright, the above pattern is more clear.
3, there is a way to identify is in addition to the export of fabric, if there are trademarks or inspection of the chapter are mostly negative.
In fact, the general fabric is positive or negative there is a clear difference, but there are a few positive and negative are similar, both sides can be used, so like this fabric do not need to distinguish their positive and negative.
1, most of the fabric in the front of the pattern and color will be better than the negative side of the good-looking; if there are lines or other patterns on the above, then it is certainly more positive; if the fabric above the protruding part , That in the positive place will certainly be more closely, will be more meticulous, but in the opposite, then it will be more rough, there will be floating long line there; you can also check the fabric of the cloth side, if more clean and tidy is positive.
2, in addition to all kinds of fabrics have their own characteristics, such as fluff fabric, if it is single-sided fluff, that is plush side is positive, but if it is double-sided hair, that positive is certainly Is the villi relatively smooth steam that side; multi-layer fabric if the pros and cons of both latitude and longitude density, most of the case the raw material is better, or the density is relatively large side is positive; another leno fabric front Ask the way to protrude some of the front of the towel fabric terry will be relatively large density, printed fabric, the color is relatively bright, the above pattern is more clear.
3, there is a way to identify is in addition to the export of fabric, if there are trademarks or inspection of the chapter are mostly negative.
In fact, the general fabric is positive or negative there is a clear difference, but there are a few positive and negative are similar, both sides can be used, so like this fabric do not need to distinguish their positive and negative.
